 





                     HP_C++________________________________________
                     Installation Guide for OpenVMS Alpha

                     Order Number: AA-PY27K-TE


                     November 2005

                     This guide contains instructions for installing HP
                     C++ on OpenVMS Alpha systems. It also explains how
                     to read the online release notes before or after
                     installing the product.

                     This guide applies to HP C++ Version 7.1 for
                     OpenVMS Alpha, and all subsequent point releases
                     for Version 7.0.





                     Revision/Update Information: This is a revised
                                                  manual, replacing
                                                  AA-PY27J-TE

                     Operating System & Version:  OpenVMS Alpha Version
                                                  7.3-2 or higher.
                                                  Future maintenance
                                                  releases might
                                                  require higher
                                                  versions.

                     Software Version:            HP C++ Version 7.1
                                                  for OpenVMS Alpha







                     Hewlett-Packard Company
                     Palo Alto, California

 






           __________________________________________________________

           © Copyright 2005 Hewlett-Packard Development Company, L.P.

           Confidential computer software. Valid license from HP
           required for possession, use or copying. Consistent with
           FAR 12.211 and 12.212, Commercial Computer Software,
           Computer Software Documentation, and Technical Data for
           Commercial Items are licensed to the U.S. Government under
           vendor's standard commercial license.

           The information contained herein is subject to change
           without notice. The only warranties for HP products
           and services are set forth in the express warranty
           statements accompanying such products and services.
           Nothing herein should be construed as constituting an
           additional warranty. HP shall not be liable for technical
           or editorial errors or omissions contained herein.

           This document is available on CD-ROM.

           Printed in the U.S.

                                                               ZK6036

           This document was prepared using DECdocument, Version
           3.3-1n.

 













   ________________________________________________________________

                                                           Contents


   Preface..................................................      v


   1  Preparing for HP C++ Installation

         1.1   Hardware Requirements........................    1-1
         1.2   Required Operating System Components.........    1-1
         1.3   Optional Software............................    1-2
         1.4   License Registration.........................    1-2
         1.5   Installation Procedure Requirements..........    1-3
         1.5.1     Process Privileges.......................    1-3
         1.5.2     Process Account Quotas...................    1-3
         1.5.3     System Parameters........................    1-4
         1.5.4     Disk Space...............................    1-5
         1.5.5     Backing Up Your System Disk..............    1-5
         1.5.6     Additional System Maintenance
                   Procedures...............................    1-5
         1.5.6.1     Checking System Parameter Values.......    1-6
         1.5.6.2     Calculating the Values for Global
                     Pagelets and Global Sections...........    1-6
         1.5.6.3     Changing System Parameter Values with
                     AUTOGEN................................    1-7
         1.5.6.4     Setting Dynamic System Parameter
                     Values.................................    1-8

   2  Installing the HP C++ Compiler

         2.1   Installing and Using Multiple Compiler
               Versions.....................................    2-1
         2.1.1     Displaying and Selecting the Compiler
                   Version..................................    2-2
         2.1.2     Installation Procedure Changes...........    2-4
         2.2   Installation Procedure.......................    2-5

                                                                iii

 






           2.3   Error Recovery...............................   2-13


     3  After C++ Installation

           3.1   Running the Installation Verification
                 Procedure Separately.........................    3-2
           3.2   Editing and Organizing the System Files......    3-2
           3.3   VMScluster Considerations....................    3-2
           3.4   User Account Requirements....................    3-2
           3.4.1     User Privileges..........................    3-3
           3.4.2     User Account Quotas......................    3-3
           3.5   Installing the HP C++ Compiler and the C++
                 Class Library as a Shared Image..............    3-3
           3.6   Removing the Compiler from Your System.......    3-5
           3.7   Getting Help and Reporting Problems..........    3-5

     A  Sample C++ Compiler Installation

     B  Files Installed on Your System


     C  Recovering from Errors

           C.1   Failures During HP C++ Installation..........    C-1
           C.2   Problems During HP C++ Use...................    C-2

     Examples

           A-1       Sample HP C++ Installation on OpenVMS
                     Alpha Version 8.2........................    A-2

     Tables

           1         Conventions..............................    vii

           1-1       Process Quotas for the Installing
                     Account..................................    1-3

           1-2       Minimum Required System Parameter
                     Values...................................    1-4

           1-3       Disk Space Requirements..................    1-5

           B-1       Files Installed or Modified..............    B-1

     iv

 











        ________________________________________________________________

                                                                 Preface



              This guide describes how to install HP C++ on the OpenVMS
              Alpha operating system. It is intended for system
              managers. Keep this guide with your distribution kit,
              in case you need it to reinstall HP C++ for any reason.

              You may send comments or suggestions concerning this
              guide, or any HP C++ document, by electronic mail to the
              following Internet address:

                 c_docs@hp.com

        Document Structure

              This guide contains three chapters and three appendixes:

              o  Chapter 1 describes how to prepare for HP C++
                 installation.

              o  Chapter 2 describes how to install the HP C++ compiler.

              o  Chapter 3 describes postinstallation procedures.

              o  Appendix A shows a sample compiler installation.

              o  Appendix B explains how to find a list of the files
                 installed on your system.

              o  Appendix C provides information to help you with
                 failures.





                                                                       v

 






     Associated Documentation

           In addition to this guide, the HP C++ 7.1 documentation
           set includes the following books:

           o  Stroustrup, Bjarne. The C++ Programming Language, 3rd
              Edition. Reading, Massachusetts: Addison-Wesley, 1997.
              This book is available only as hardcopy documentation.

           o  Using HP C++ for OpenVMS Alpha

           o  C++ Class Library Reference Manual (online only)

           o  C Run-Time Library Reference Manual for OpenVMS Systems

           For information on the HP C++ online release notes, see
           Chapter 1.

           For general information on OpenVMS system management, see
           the OpenVMS operating system documentation set.

           For help understanding OpenVMS system error messages,
           see the OpenVMS System Messages and Recovery Procedures
           Reference Manual or the online HELP/MESSAGE facility.





















     vi

 






        Conventions

              Table 1 lists the conventions used in this guide.

              Table_1_Conventions_______________________________________

              Convention________________Meaning_________________________

              UPPERCASE TEXT            Uppercase text indicates the
                                        name of a command, a file,
                                        a parameter, a procedure, or
                                        utility.

              $ @SYS$UPDATE:VMSINSTAL   In interactive examples, prompts
                                        or displayed text appears in
                                        a monospace font. User input
                                        appears in bold monospace font.

              italic type               Italic type indicates important
                                        information, complete titles of
                                        manuals, or variables. Variables
                                        include information that varies
                                        in system output (Internal
                                        error number), in command lines
                                        (/PRODUCER=name), and in command
                                        parameters in text (where dd
                                        represents the predefined code
                                        for the device type).

              <Return>                  In interactive examples, a
                                        key name is shown enclosed to
                                        indicate that you press a key on
                                        the keyboard.

              Ctrl/X                    In interactive examples,
                                        a sequence such as Ctrl/X
                                        indicates that you must hold
                                        down the key labeled Ctrl while
                                        you press another key or a
                                        pointing device button; for
                                        example, Ctrl/C or Ctrl/Z.

                                                (continued on next page)


                                                                     vii

 






           Table_1_(Cont.)_Conventions_______________________________

           Convention________________Meaning_________________________

           [YES]                     Square brackets indicate that
                                     the enclosed item is a default
                                     value in a VMSINSTAL prompt.
                                     Also, square brackets serve as
                                     delimiters for a directory name
           __________________________in_a_file_specification.________

           In this manual, some version numbers are given as Vn.n.
           When you install HP C, the actual version numbers appear
           on your screen.































     viii

 









                                                                       1
        ________________________________________________________________

                                       Preparing for HP C++ Installation



              This chapter discusses the preparations and requirements
              necessary for installing HP C++ for OpenVMS Alpha Systems.

              This guide applies to Version 7.1 of HP C++ for OpenVMS
              Alpha Systems and all subsequent maintenance releases
              up to the next release of the product that includes an
              updated installation guide.

              Your bill of materials (BOM) and indented bills report
              (BIL) specify the number and contents of your media.
              Be sure to verify the contents of your kit with this
              information. If your kit is damaged or if you find that
              parts of it are missing, contact your HP representative.

              HP C++ provides online release notes, which are copied
              to SYS$HELP during installation. HP strongly recommends
              that you read the release notes before proceeding with the
              installation. For information on accessing the online
              release notes for the HP C++ compiler, see step 2 in
              Section 2.2.

        1.1 Hardware Requirements

              You can install HP C++ on any Alpha processor system
              capable of running OpenVMS Alpha Version 7.3-2 or higher.
              See the OpenVMS Operating System's Software Product
              Description (SPD 25.01.nn) for details.

        1.2 Required Operating System Components

              HP C++ Version 7.1 for OpenVMS Alpha Systems requires
              OpenVMS Alpha Version 7.3-2 or higher. Future HP C++
              releases may require higher versions of the OpenVMS
              operating system, as described in the online release notes
              or the Read Before Installing or Using HP C++ Version 7.n
              for OpenVMS Systems letter.

                                   Preparing for HP C++ Installation 1-1

 






           The OpenVMS operating system comes with a variety of
           support options, or classes. Classes include such features
           as networking and RMS journaling. To use HP C++, your
           system should be running a version of OpenVMS Alpha that
           includes the following classes:

           o  Programming support

           o  Utilities

           For a complete list of the required classes, see the HP
           C++ Software Product Description (SPD).

     1.3 Optional Software

           You can use the following optional software with HP C++:

           o  HP Language-Sensitive Editor/Source Code Analyzer
              (LSE/SCA) for OpenVMS Alpha Systems. Support for C++
              requires that LSE be installed before the compiler is
              installed.

           o  HP Test Manager (DTM) for OpenVMS Alpha Systems

           o  HP Performance and Coverage Analyzer (PCA) for OpenVMS
              Alpha Systems

           o  HP Code Management System (CMS) for OpenVMS Alpha
              Systems

           o  HP Module Management System (MMS) for OpenVMS Alpha
              Systems

           For more information on HP DECset Release 12.4A for
           OpenVMS Alpha Systems, refer to the Software Product
           Description (SPD 42.29.nn).

     1.4 License Registration

           Before you start the installation, you must register and
           load the License Product Authorization Key (License PAK)
           using the OpenVMS License Management Facility (LMF). (For
           complete information on using the LMF, see the OpenVMS
           License Management Utility Manual.)

     1-2 Preparing for HP C++ Installation

 






        1.5 Installation Procedure Requirements

              This section discusses settings that you should check to
              be sure that your system is ready for the installation of
              HP C++ to proceed.

        1.5.1 Process Privileges

              To install HP C++, you must be logged in to an account
              that has SETPRV or at least the following privileges:

              o  CMKRNL

              o  WORLD

              o  SYSPRV

              VMSINSTAL turns off BYPASS privileges at the start of the
              installation.

        1.5.2 Process Account Quotas

              VMSINSTAL requires that the installation account have
              minimum quotas as shown in Table 1-1.

              Table_1-1_Process_Quotas_for_the_Installing_Account_______

              Name________Quota_________________________________________

              ASTLM       190

              BIOLM       160

              BYTLM       99,000

              DIOLM       160

              ENQLM       4000

              FILLM_______300___________________________________________

              Use the OpenVMS Authorize Utility to verify and change
              process quotas for the installation account in the user
              authorization file (UAF). (Some sites may restrict the
              use of the OpenVMS Authorize Utility to certain accounts
              or people.) For instance, to change the BYTLM quota for
              the account-name installation account, you might enter the
              following command sequence:

                                   Preparing for HP C++ Installation 1-3

 






           $ RUN SYS$SYSTEM:AUTHORIZE
           UAF> MODIFY account-name /BYTLM = 99000
           UAF> SHOW account-name
           UAF> EXIT
           $ LOGOUT

           After the quotas for the installation account have been
           changed, log out of the installation account and log in
           again for the new quotas to take effect. You can then
           proceed with the installation.

           User account quotas are stored in the file SYSUAF.DAT.
           For more information on modifying account quotas, see the
           description of the Authorize Utility in the OpenVMS System
           Management documentation set.

     1.5.3 System Parameters

           Table 1-2 lists the minimum required system parameter
           values for the installation. Depending on the kinds of
           programs and applications running at your site, you might
           need higher values for some settings.

           Table_1-2_Minimum_Required_System_Parameter_Values________

                                    Minimum
           System_Parameter_________Value________Default_Value_______

           CLISYMTBL[1]             500          500

           GBLPAGES[2]              8400         8400

           GBLPAGFIL                1024         1024

           GBLSECTIONS[2]           2            2
           [1]The_CLISYMTBL_dynamic_system_parameter_must_be_set_to__

           a minimum value of 500 during the installation procedure.
           You can change the setting to its original value once the
           installation is finished.
           [2]These values represent the number of free global
           pagelets and global sections required for the
           installation, not the total number you need to run your
           system and other software.
           __________________________________________________________

     1-4 Preparing for HP C++ Installation

 






        1.5.4 Disk Space

              Requirements for free disk storage space are different
              during installation and after installation. Table 1-3
              summarizes the storage requirements.

              Table_1-3_Disk_Space_Requirements_________________________

                                Blocks After       Peak During
              Component_________Installation_______Installation_________

              Compiler          150,000            160,000

              Text Header       13,000             13,000
              Files

              CXXLINK           500                500

              __________________________________________________________

              All_Components____163,500____________173,500______________

              To determine the number of free disk blocks on the current
              system disk, enter the following command at the DCL
              prompt:

              $ SHOW DEVICE SYS$SYSDEVICE

        1.5.5 Backing Up Your System Disk

              At the beginning of the installation, VMSINSTAL asks
              if you have backed up your system disk. HP recommends
              that you back up your system disk before installing any
              software.

              Use the backup procedures that are established at your
              site. For details on performing a system disk backup, see
              the section on the Backup Utility in the OpenVMS System
              Management documentation set.

        1.5.6 Additional System Maintenance Procedures

              This section explains how to use the System Generation
              Utility (SYSGEN) and the AUTOGEN Utility to prepare
              your system for an installation of HP C++. AUTOGEN uses
              system configuration data to automatically set system
              parameters.

                                   Preparing for HP C++ Installation 1-5

 






     1.5.6.1 Checking System Parameter Values

           To check the values of your system parameters, enter the
           following command:

           $ RUN SYS$SYSTEM:SYSGEN
           SYSGEN>

           At the SYSGEN> prompt, enter the SHOW command to display
           the value of a system parameter. The following example
           displays the value for the WSMAX system parameter:

           SYSGEN> SHOW WSMAX

           Parameter Name   Current   Default    Min.  Max.      Unit
           --------------   -------   -------    ----  -------   ----
           WSMAX              81920      4096    1024  1048576   Pagelets
            internal value     5120       256      64    65536   Pages

           After checking the parameters with the SHOW command, enter
           the EXIT command at the SYSGEN> prompt to return to DCL
           level. For information on setting dynamic system parameter
           values, see Section 1.5.6.4.

     1.5.6.2 Calculating the Values for Global Pagelets and Global
             Sections

           To install and run HP C++, you must have sufficient free
           global pagelets and global sections. You must first find
           out how many free global pagelets and sections you have on
           your system. Then use AUTOGEN if you need to increase the
           global pagelets and global sections system parameters.

           Enter the following DCL command to determine the number of
           global pagelets required by SYS$LIBRARY:DCLTABLES.EXE:

           $ DIRECTORY/SIZE SYS$LIBRARY:DCLTABLES.EXE

           This command returns the size (in blocks) of SYS$LIBRARY:DCLTABLES.EXE.
           As an approximation, use this figure as the number of
           global pagelets for the file.

           You can use the WRITE command with the F$GETSYI lexical
           function to find the number of free global pagelets and
           global sections. The following example shows how to
           get this information at your terminal (the default for
           SYS$OUTPUT):

     1-6 Preparing for HP C++ Installation

 






              $ WRITE SYS$OUTPUT F$GETSYI("CONTIG_GBLPAGES")
              15848
              $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLSECTS")
              24

              If the values displayed by the system are greater than
              the values in Table 1-2, you do not need to increase the
              values for these parameters. If the value of free global
              pagelets or global sections is less than the value in
              Table 1-2, you must increase the system parameter setting.

              Section 1.5.6.3 describes the procedures for increasing
              these values using AUTOGEN.

        1.5.6.3 Changing System Parameter Values with AUTOGEN

              Use the AUTOGEN command procedure to change system
              parameters. AUTOGEN automatically adjusts values for
              parameters that are associated with the values you reset
              manually. To change system parameters with AUTOGEN, edit
              the following file:

              SYS$SYSTEM:MODPARAMS.DAT

              Use an editor to access the file. To change a parameter
              value listed in this file, delete the current value
              associated with that parameter and enter the new value.

              To add a new parameter, add a line to the file that
              includes both the name of the parameter and its value.
              For example:

              WSMAX = 8096

              To modify incremental parameters such as free global
              pagelets and global sections, use ADD_GBLPAGES or ADD_
              GBLSECTS. The following example increases the global page
              setting by 2000:

              ADD_GBLPAGES = 2000

              When you set the page file quota, do not use a value that
              exceeds the amount of page file space available on the
              system.

                                   Preparing for HP C++ Installation 1-7

 






           After you make all your changes, exit from the editor and
           execute the AUTOGEN procedure to recalculate your system
           parameters. The following command recalculates your system
           parameters and reboots the system:

           $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT

           When you specify REBOOT, AUTOGEN performs an automatic
           system shutdown and then reboots the system. Any users
           logged on to the system are immediately disconnected
           during the shutdown. The automatic reboot puts the new
           parameter values into effect.

           AUTOGEN automatically adjusts some of the SYSGEN
           parameters based on the consumption of resources since the
           last reboot. If you do not want to take advantage of this
           automatic adjustment, include the /NOFEEDBACK qualifier on
           the AUTOGEN command line.

           For more information about using AUTOGEN, see the system
           management documentation for your operating system.

     1.5.6.4 Setting Dynamic System Parameter Values

           Use SYSGEN to set dynamic parameters. Dynamic parameters
           changed with the SYSGEN command WRITE ACTIVE become
           active immediately without any need to reboot your system.
           Rebooting returns dynamic system parameter values to their
           previous settings.

           After you change the dynamic parameter values, you should
           complete the installation before rebooting the system.
           After you finish the installation, you can reset the
           dynamic parameters to their previous values or let them be
           reset automatically when you reboot your system the next
           time.

           If the dynamic parameter values on your system are less
           than the values previously listed, use the following
           series of commands to change the values. This example
           changes the GBLPAGES value to 100000:

           $ RUN SYS$SYSTEM:SYSGEN
           SYSGEN> USE ACTIVE
           SYSGEN> SET GBLPAGES 100000
           SYSGEN> WRITE ACTIVE
           SYSGEN> EXIT

     1-8 Preparing for HP C++ Installation

 









                                                                       2
        ________________________________________________________________

                                          Installing the HP C++ Compiler



              After you register and load the License Product Authorization
              Key (License PAK), the installation takes approximately 10
              to 15 minutes, depending on your system configuration and
              the kit components chosen.

        2.1 Installing and Using Multiple Compiler Versions

              C++ Version 7.1 provides support for installing and using
              multiple versions of the compiler on the same node.

              During installation of Version 7.n, if a Version 6.n
              of the compiler is already installed, you have the
              opportunity to preserve that compiler rather than
              overwrite it. If you choose to preserve the currently
              installed compiler, you are then given a choice to keep
              the currently installed compiler as the system default and
              install the new compiler as an alternate.

              By default, the currently installed system compiler
              is preserved by making it an alternate compiler and
              installing the new compiler as the system default. Users
              can make the choice to use an alternate compiler instead
              of the installed system compiler by running a command
              procedure that changes the behavior of the cxx command for
              the process that invokes it.

              Some details of the following description may change, but
              the mechanism is essentially as follows.







                                      Installing the HP C++ Compiler 2-1

 






     2.1.1 Displaying and Selecting the Compiler Version

           This kit provides two command procedures to display and
           control which C++ compiler is used by a process:

           o  SYS$SYSTEM:CXX$SHOW_VERSIONS.COM

              This procedure displays the C++ compilers available on
              the system, along with their version numbers. It also
              displays which compiler is the default for the current
              process. The procedure takes an optional version-number
              argument. Examples:

              $ @sys$system:cxx$show_versions.com

              The following C++ compiler(s) are available in
              SYS$SYSTEM:

              Filename                      Version
              ---------------------------------------
              CXX$COMPILER.EXE             V6.5-020
              CXX$COMPILER_V06_04-002.EXE  V6.5-002
              CXX$COMPILER_V06_04-001.EXE  V6.5-001
              CXX$COMPILER_V06_00-001.EXE  V6.0-001    Process Default
              CXX$COMPILER_V06_02-008.EXE  V6.2-008

              $ @sys$system:cxx$show_versions.com V6.0

              The following C++ compiler(s) are available in
              SYS$SYSTEM:

              Filename                      Version
              ---------------------------------------
              CXX$COMPILER_V06_00-001.EXE  V6.0-001    Process Default

           o  SYS$SYSTEM:CXX$SET_VERSION.COM

              This procedure sets up process logicals that point
              to an alternate C++ compiler in SYS$SYSTEM, or it
              removes the process logicals to revert to using the
              default system compiler. The procedure takes one
              argument, a version number or the keyword SYSTEM.
              If no arguments are specified you are prompted for
              them. The SYSTEM argument selects the installed
              system compiler, which is the one displayed with the
              filename CXX$COMPILER.EXE in the output of CXX$show_
              versions.com. Alternate compilers are shown in that
              output with their version number appended to the simple

     2-2 Installing the HP C++ Compiler

 






                 filename; for example, the version 6.2-008 compiler is
                 shown as CXX$COMPILER_V06_02-008.EXE.

                 To select a compiler, pass a full ident string or
                 enough of the ident string to be unique. For example:
                 to select the V6.2-008 compiler from the previous
                 list, pass V6.2-008 or V6.2 to the CXX$set_version.com
                 routine. However, to select a 6.5 compiler, a full
                 ident string is required to distinguish between the
                 V6.5-020, V6.5-001, and the V6.5-002 compiler:

        $ @sys$system:cxx$set_version.com V6.2-008

        $ show logical CXX$*

        (LNM$PROCESS_TABLE)

          "CXX$COMPILER" =
            "SYS$SYSTEM:CXX$COMPILER_V06_02-008.EXE"
          "CXX$MSG_SHR" =
            "SYS$MESSAGE:CXX$MSG_SHR_V06_02-008.EXE"

        $ @CXX$set_version.com 6.5

        The following 6.5 C++ compiler(s) are available in
        SYS$SYSTEM:

        Filename                      Version
        ---------------------------------------
        CXX$COMPILER.EXE             V6.5-020
        CXX$COMPILER_V06_04-001.EXE  V6.5-001
        CXX$COMPILER_V06_04-002.EXE  V6.5-002

        Ambiguous version number, please be specify a full version number, ex: V6.5-020
        Version number : V6.5-020

        $ show logical CXX$COMPILER
          "CXX$COMPILER" = "SYS$SYSTEM:CXX$COMPILER_V06_04-005.EXE" (LNM$PROCESS_TABLE)
        $ show logical CXX$msg_shr
          "CXX$MSG_SHR" = "SYS$MESSAGE:CXX$MSG_SHR_V06_04-005.EXE" (LNM$PROCESS_TABLE)

                 When this procedure is run in a process, subsequent cxx
                 commands invoke the selected compiler version (until
                 the procedure is run again). The process-level logicals
                 used do not affect other processes or users on the
                 system.

              o  SYS$SYSTEM:CXX$DELETE_VERSION.COM

                                      Installing the HP C++ Compiler 2-3

 






              This procedure removes the C++ compilers from the
              system. The procedure takes an optional version-number
              argument, as shown in the following example:

              $ @sys$system:cxx$delete_version V6.5-001

              The following V6.5-001 HP C++ compiler(s) are available in SYS$SYSTEM

              Filename                      Version
              ---------------------------------------
              CXX$COMPILER_V06_05-001.EXE   V6.5-001

              Really delete these compiler(s)? yes
              Deleting HP C++ V6.5-001

              Deleting SYS$COMMON:[CXX$LIB]CXX$CLD_V06_05-001.CLD;
              Deleting SYS$COMMON:[SYSEXE]CXX$COMPILER_V06_05-001.EXE;1
              Deleting SYS$COMMON:[SYSMSG]CXX$COMPILER_MSG_V06_05-001.EXE;1
              Deleting SYS$COMMON:[SYSEXE]CXX$LINK_V06_05-001.EXE;1
              Deleting SYS$COMMON:[SYSMSG]CXX$LINK_MSG_V06_05-001.EXE;1
              Deleting SYS$COMMON:[SYSEXE]CXX$DEMANGLE_V06_05-001.EXE;1
              Deleting SYS$COMMON:[SYSLIB]CXXL$ANSI_DEF_V06_05-001.TLB;1
              Deleting SYS$COMMON:[SYSLIB]LIBCXXSTD_V06_05-001.OLB;1
              Deleting SYS$COMMON:[CXX$LIB]CXXDEMANGLE_V06_05-001.CLD;
              Deleting SYS$COMMON:[CXX$LIB]CXXLINK_V06_05-001.CLD;

     2.1.2 Installation Procedure Changes

           When you install C++ Version 7.1 or higher on a system
           that already has a Version 6.0 or higher compiler
           installed, you are given the chance to preserve the
           currently installed system compiler. To do this, answer
           YES to the following question (the xxx will be replaced by
           the full version number of the existing system compiler):

           "Should the existing xxx system compiler be preserved [NO]:"

           If you answer NO, the installation proceeds in the
           traditional manner, overwriting the currently installed
           system compiler.

           If you answer YES, you are then asked an additional
           question. To get the traditional behavior of installing
           the kit compiler as the system default, answer NO to the
           question:

           "Should this xxx system compiler remain the default when cxx is typed [NO]:"

     2-4 Installing the HP C++ Compiler

 






              Because you have previously asked to preserve the existing
              system compiler, that compiler is made an alternate
              compiler before the new system compiler is installed
              from the kit. If you answer YES to the question, the kit
              compiler is installed as an alternate compiler with a
              name that is based on its ident, and the existing system
              default compiler remains the default.

        2.2 Installation Procedure

              If it is not already inserted, place the compact disc
              (CD-ROM) media into the CD-ROM drive.

              To abort the installation procedure at any time, press
              Ctrl/Y. When you press Ctrl/Y, the installation procedure
              deletes all files it has created up to that point and
              exits. You can then start the installation again.

                ________________________Note  ________________________

                The kit installation procedure invokes a utility
                program to manipulate header file text libraries.
                Attempts to abort the installation might be ignored
                while the program is executing. If the procedure
                does not abort immediately, press Ctrl/Y until it
                does.

                _____________________________________________________

              When the system prompts you with a question during the
              installation procedure, the default answer is often listed
              in brackets ([]).

              1. Log in to a privileged account and set your default
                 device and directory to SYS$UPDATE.

                  Username: SYSTEM
                  Password:

              2. Invoke VMSINSTAL.

                 @SYS$UPDATE:VMSINSTAL saveset-name device-name option-list



                                      Installing the HP C++ Compiler 2-5

 






              To start the installation, invoke the VMSINSTAL command
              procedure from a privileged account, such as the SYSTEM
              account. VMSINSTAL is in the SYS$UPDATE directory. The
              elements that you specify when you invoke the VMSINSTAL
              command procedure are as follows:

              saveset-name
              The installation name for the component. For HP C++,
              use the following installation name:

              CXX07n

              n represents the minor (point) release number for HP
              C++ such as CXX071 for Version 7.1.

              To obtain the directory location of the HP C++ save set
              on the CD-ROM, refer to the Software Product Library
              CD-ROM User's Guide booklet that accompanies the CD-
              ROM distribution kit, or before starting installation,
              complete these steps:

              a. To determine whether the CD-ROM drive is already
                 mounted (with the MOUNT command), enter the
                 following command:

                 $ SHOW DEVICE DKA400:

              b. If it is not mounted, enter the appropriate MOUNT
                 command to mount the CD-ROM (omit the /FOREIGN
                 qualifier).

              c. To obtain the save-set name, enter a DIRECTORY
                 command specifying the directory file from the
                 previous command:

                 $ DIRECTORY DKA400:[CXX07n.KIT]CXX07n.A

                 n represents the minor release of HP C++.

              device-name
              The name of the device on which you plan to mount the
              media and the directory containing the HP C++ save
              set. For example, DKA400: is the device name used in
              examples in this guide. The directory is [CXX07n],
              where n is the minor release number.

     2-6 Installing the HP C++ Compiler

 






                 To specify the device name on the @VMSINSTAL command
                 line, enter:

                 DKA400:[CXX07n]

                 option-list
                 The word OPTIONS followed by one or more of the
                 following option designators-A, G, L, N, R:

                 o  Auto_answer option (A)

                    Initially creates a file that contains your answers
                    to VMSINSTAL questions and prompts. You can then use
                    the option (and the answer file) to save time during
                    a reinstallation (typically after upgrading your
                    system).

                 o  Get save-set option (G)

                    Lets you store product save sets temporarily on a
                    magnetic tape or in a disk directory.

                 o  File log option (L)

                    Logs all activity to the terminal during installa-
                    tion.

                 o  Display or print the release notes (N)

                    Indicates that you want to see the installation
                    question on release notes. If you do not include
                    the N option, VMSINSTAL does not ask you about
                    the release notes. You should review the release
                    notes before proceeding with the installation in
                    case they contain additional information about the
                    installation.

                    If you are restarting the installation and have
                    already reviewed the release notes, you do not need
                    to specify the N option. (Even if you omit the N
                    option when you invoke VMSINSTAL, the HP C++ release
                    notes are copied automatically to the SYS$HELP
                    directory.)

                 o  Alternate root option (R)

                    Lets you install the product to a system root other
                    than that of the running system.

                                      Installing the HP C++ Compiler 2-7

 






              For detailed information on these software installation
              options, see the OpenVMS operating system documenta-
              tion. If you specify more than one option, separate the
              options with commas, such as OPTIONS A,N.

              The following example invokes VMSINSTAL to install HP
              C++ and shows the system response. This example uses
              the OPTIONS N release note option.

              $ @SYS$UPDATE:VMSINSTAL CXX07n DKA400:[CXX07n] OPTIONS N

                    OpenVMS Alpha Software Product Installation Procedure V8.2

              It is dd-mmm-yyyy at hh:mm.
              Enter a question mark (?) at any time for help.

              If you do not supply either the product name or the
              device name, VMSINSTAL prompts you for this information
              later in the installation procedure.

           3. Verify user's account and quotas.

              When you invoke VMSINSTAL, it checks the following:

              o  Whether you are logged in to a privileged account.
                 HP recommends that you install software from the
                 system manager's account with your default device
                 and directory set to SYS$UPDATE.

              o  Whether you have adequate quotas for installation.
                 VMSINSTAL checks for the quota values shown in
                 Table 1-1.

              VMSINSTAL then checks to determine whether any users
              are logged in to the system. If users are logged
              in, VMSINSTAL asks whether you want to continue the
              installation:

              * Do you want to continue anyway [NO]?  YES

              If you want to continue, enter YES. If you want to stop
              the installation, press Return.

           4. Confirm system backup.

              * Are you satisfied with the backup of your system disk [YES]?

     2-8 Installing the HP C++ Compiler

 






                 If you are satisfied with the backup of your system
                 disk, press Return. Otherwise, enter NO to discontinue
                 the installation. After you back up your system disk,
                 you can restart the installation.

              5. Specify distribution.

                 If you omitted the device name on the VMSINSTAL command
                 line, the following prompt appears:

                 * Where will the distribution volumes be mounted: DKA400:[CXX07n]

                 If this prompt appears, enter the name of the
                 distribution (media) device and directory that contains
                 the HP C++ kit (save set). For example, if the media is
                 contained on a CD-ROM located on unit DKA400:, enter
                 DKA400:[CXX07n] in reply to this question (where n is
                 the minor version number).

              6. Specify save set.

                 If you omitted the product save set name on the
                 VMSINSTAL command line, the following prompt appears:

                 Enter the products to be processed from the first distribution volume set.
                 * Products: CXX07n

                 If this prompt appears, enter the C++ for OpenVMS Alpha
                 kit name. The name has the format: CXX07n (where n is
                 the minor version number).

              7. Verify the product being installed.

                  The following products will be processed:

                    CXX V7.n

                      Beginning installation of CXX V7.n  at hh:mm

                    %VMSINSTAL-I-RESTORE, Restoring product save set A...

                 The product name and version are displayed. This save
                 set (A) is restored to a subdirectory of SYS$UPDATE:.

                 Next, VMSINSTAL displays a message like the following:

                                      Installing the HP C++ Compiler 2-9

 






              %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.


                 HP C++ V7.n for OpenVMS Alpha Systems

              The release notes are copied to the following files in
              the SYS$HELP directory:

              SYS$HELP:CXX.RELEASE_NOTES
              SYS$HELP:CXX_RELEASE_NOTES.PS

              After the installation, you can enter the following
              command to view the location of the release notes
              through the Help facility:

              $ HELP CXX RELEASE_NOTES

           8. Choose the Installation Verification Procedure option

              If you have chosen to install the compiler component,
              the installation procedure now asks if you want to run
              the Installation Verification Procedure (IVP). The IVP
              checks to be sure that the installation is successful.
              HP recommends that you run the IVP.

              * Do you want to run the IVP after the installation [YES]?

              After HP C++ is installed, you can run the IVP
              independently to verify that the software is available
              on your system. You might need to run the IVP after a
              system failure to make sure that users can access HP
              C++.

           9. Select components to install

              The installation procedure lets you select the
              components of the kit that you want to install. The
              choices are as follows:

              o  C++ compiler

                 This component includes help text, command
                 definitions, and the IVP for the compiler.

              o  C Run-Time Library and C++ Class Library text header
                 files

     2-10 Installing the HP C++ Compiler

 






                    For efficiency, the header files are installed
                    on the system in text library format, within
                    SYS$LIBRARY. However, this creates a problem when
                    users need to use the headers as reference. To
                    remedy this, the installation procedure will now
                    prompt you to install a "reference copy" of the
                    text headers. These are in traditional text form,
                    and are suitable for searching, lookup, and so on.
                    When selected, the procedure will break them up and
                    install them into the following subdirectories:

                    SYS$COMMON:[CXX$LIB.REFERENCE.CXXL$DEF_HXX]
                    SYS$COMMON:[CXX$LIB.REFERENCE.CXXL$DEF_H]
                    SYS$COMMON:[CXX$LIB.REFERENCE.CXX$RTLDEF_HXX]
                    SYS$COMMON:[CXX$LIB.REFERENCE.CXX$RTLDEF]

                    By default, they will not be searched by the
                    compiler.

                ________________________Note  ________________________

                The header files (text libraries) are now au-
                tomatically installed based on the time stamps
                found within them. Time stamps on the kit versions
                are compared to those on the system, and the kit
                libraries are installed only if they are found to be
                more recent. All of this occurs without prompting.

                _____________________________________________________

                 o  CXXLINK facility

                 Select the components you want to install by answering
                 YES or NO to the questions. If you want a more detailed
                 description of any component, enter a question mark
                 (?). After the explanation is displayed, you will be
                 prompted again for a response.

                 If you enter YES, the installation procedure validates
                 that your request is possible and installs the
                 component.

                 If you enter NO, the installation procedure then issues
                 prompts for selecting the next component.

             10. Respond to license registration query

                                     Installing the HP C++ Compiler 2-11

 






              The HP C++ compiler component supports the OpenVMS
              License Management Facility (LMF). (For complete
              information on using the LMF, see the OpenVMS License
              Management Utility Manual.) If you entered YES to
              install the compiler component, the installation
              procedure displays license information about HP C++.
              It asks whether you have registered and loaded your
              PAK for each product. The following is an example
              of the information and the queries presented by the
              installation procedure:

                  The HP C++ compiler component requires a Product
                  Authorization Key (PAK) for HP C++ to be registered and
                  loaded.   Answer the following question with YES if a PAK
                  with the specified product name and a date equal to or
                  later than the date shown is registered and loaded, otherwise
                  answer NO.

                    Product:      CXX-V
                    Producer:     DEC

                    Version:      7.n

                    Release Date: dd-mmm-yyyy

              * Does this product have an authorization key registered and
              loaded?: YES

              If you have not registered and loaded your PAK, you
              must answer NO to this question. You must register
              and load your PAKs to complete the installation
              successfully. If you have not done so, you should stop
              the installation, register and load your PAKs, and then
              restart the installation.

          11. Read informational messages

              At this point, the installation procedure displays a
              number of informational messages that report on the
              progress of the installation. There are no further
              questions. If the installation procedure has been
              successful up to this point, VMSINSTAL moves the new
              or modified files to their target directories, updates
              help files, and updates DCL tables, if necessary. See
              Appendix B for a list of files installed on the system.

     2-12 Installing the HP C++ Compiler

 






                 If you answered YES in response to the prompt that
                 requests a file purge, previous versions of the HP C++
                 files are now purged. The end of the installation is
                 indicated by the following message:

                 %VMSINSTAL-I-MOVEFILES, files will now be moved to their target
                                         directories...

             12. Observe the IVP

                 If you chose to run the IVP, VMSINSTAL now invokes the
                 IVP to verify that HP C++ was installed successfully.

                 If HP C++ was installed successfully, the IVP displays
                 the following:

                 HP C++ V7.n Installation Verification Procedure completed successfully.

             13. End the installation procedure

                  Installation of CXX V7.n completed at hh:mm

                     Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

                     Creating installation data file: VMI$ROOT:[SYSUPD]CXX07n.VMI_DATA

                 Depending on whether you specified parameters on the
                 VMSINSTAL command line, the * Products: prompt or the
                 DCL prompt ($) may appear. If the * Products: prompt
                 appears, you can return to the DCL prompt by pressing
                 Ctrl/Z.

                 If you removed any media from the console drive before
                 beginning the installation, you should replace it now.

                 VMSINSTAL deletes or changes entries in the process
                 symbol tables during the installation. Therefore,
                 if you are going to continue using the installation
                 account (such as SYSTEM) and you want to restore these
                 symbols, you should log out and log in again.

        2.3 Error Recovery

              If VMSINSTAL detects any problems during the installation,
              it notifies you and asks if you want to continue the
              installation. In some instances, you can enter YES to
              continue. To stop the installation process and correct the
              situation, enter NO or press Return. Correct the problem
              and restart the installation.

                                     Installing the HP C++ Compiler 2-13

 






           If errors occur during the installation itself or when
           the Installation Verification Procedure (IVP) is running,
           VMSINSTAL displays failure messages. If the installation
           fails, you will see the following message:

           %VMSINSTAL-E-INSFAIL, The installation of HP C++
               Version 7.n has failed.

           If the IVP fails, you will see these messages:

           The HP C++ Version 7.n Installation
               Verification Procedure failed.

           %VMSINSTAL-E-IVPFAIL, The IVP for HP C++
               Version 7.n has failed.

           Errors can occur during the installation if any of the
           following conditions exist:

           o  The operating system version is incorrect.

           o  A prerequisite software version is incorrect.

           o  Quotas necessary for successful installation are
              insufficient.

           o  System parameter values for successful installation are
              insufficient.

           o  The OpenVMS Help library is currently in use.

           o  The product license has not been registered and loaded.

           For descriptions of the error messages generated by these
           conditions, see the OpenVMS documentation on system
           messages, recovery procedures, and OpenVMS software
           installation. If you are notified that any of these
           conditions exist, you should take the appropriate
           action as described in the message. For information on
           installation requirements, see Chapter 1.

           If the installation fails, you must restart the instal-
           lation procedure from step 2. For an explanation of
           any system messages, see the OpenVMS System Messages
           and Recovery Procedures Reference Manual or the online
           HELP/MESSAGE facility. If the installation fails due to an
           IVP failure, contact an HP field service representative.

     2-14 Installing the HP C++ Compiler

 









                                                                       3
        ________________________________________________________________

                                                  After C++ Installation



              HP C++ is now installed and can be invoked by all users
              with the cxx command.

              The installation procedure modifies the DCL command table
              so that the cxx command is recognized and processed.
              However, the previous command table is still in effect
              for those users who are currently logged in. All logged-in
              users who want to use the cxx command must log out and log
              in again, or use the following DCL command:

              $ SET COMMAND /TABLES=SYS$LIBRARY:DCLTABLES

              The following tasks can be performed after HP C++ is
              installed:

              o  Running the Installation Verification Procedure (IVP)
                 separately

              o  Editing the system startup and shutdown files

              o  Modifying system parameter settings

              o  Making the product usable on a VMScluster

              o  Setting user account quotas

              o  Installing the compiler as a shared image

              o  Removing the compiler, if desired

              o  Reporting problems

              The following sections describe these tasks in detail.


                                              After C++ Installation 3-1

 






     3.1 Running the Installation Verification Procedure Separately

           You usually run the Installation Verification Procedure
           (IVP) during installation. To run the IVP separately to
           ensure the integrity of installed files should system
           problems occur, type the following:

           $ @SYS$TEST:CXX$IVP.COM

           If the IVP fails, you see these messages:

           The HP C++ 7.1 Installation Verification Procedure failed.

           %VMSINSTAL-E-IVPFAIL, The IVP for HP C++ 7.1 has failed.

     3.2 Editing and Organizing the System Files

           You do not need to edit the compiler system startup
           (CCXX$STARTUP.COM) and shutdown files to provide for auto-
           matic startup and shutdown of HP C++ when your system is
           rebooted. You may optionally add SYS$STARTUP:CCXX$STARTUP.COM
           to the system startup procedure to install the images.

     3.3 VMScluster Considerations

           After completing the initial installation, if you want
           to install HP C++ on multiple nodes in a cluster, you
           must run INSTALL on each of the other nodes and enter the
           following command:

           INSTALL>  REPLACE SYS$LIBRARY:DCLTABLES.EXE

           If you are using a dual-architecture (VAX and Alpha
           systems) heterogeneous cluster, before executing these
           commands, make sure the appropriate logical names have
           been set to define the scope of the SYSMAN DO commands.
           For more information, see the OpenVMS System Manager's
           Manual.

     3.4 User Account Requirements

           Many products cannot be used unless certain privilege and
           quota requirements are met by user accounts. The following
           sections describe the privilege and quota requirements
           needed to work with HP C++.

     3-2 After C++ Installation

 






        3.4.1 User Privileges

              To use HP C++, each account must have at least the TMPMBX
              and NETMBX privileges. Use the OpenVMS Authorize Utility
              to determine whether users have the privileges they
              require.

        3.4.2 User Account Quotas

              To use HP C++, a user account does not need to meet any
              special quota requirements. However, for users who will be
              compiling very large programs (many program units compiled
              together), consider adjusting the working set (WSDEF,
              WSQUOTA, WSEXTENT) and pagefile (PGFLQUOTA) account quotas
              to improve performance.

              See Section 1.5.2 for a description of how to verify and
              change account quotas.

        3.5 Installing the HP C++ Compiler and the C++ Class Library as
            a Shared Image

              HP highly recommends that you reduce the system overhead
              and memory requirements by installing the HP C++ compiler
              and the C++ Class Library as shared images. To install
              HP C++ as a shared image on a system that is currently
              running, use the INSTALL Utility. HP recommends that
              you install HP C++ as shared on a system that has been
              rebooted recently because the available space in the
              global pagelet table is less likely to be fragmented.

              To install HP C++ and the Class Library as a shared image:

              1. Determine the number of available (free) global
                 pagelets and global sections on your system and the
                 number of each needed to install and run HP C++ (see
                 Section 1.5.6.2).

              2. If necessary, increase the current number of global
                 pagelets and global sections parameters (see Section 1.5.6.2).

              After you reset the system parameter values, invoke the
              INSTALL Utility from a privileged account and install the
              HP C++ compiler as a shared image:

                                              After C++ Installation 3-3

 






           $ INSTALL
           INSTALL> ADD SYS$SYSTEM:CXX$COMPILER.EXE /OPEN /SHARED
           INSTALL> EXIT

           Similarly, install the C++ Class Library as a shared
           image:

           $ INSTALL
           INSTALL> ADD SYS$LIBRARY:CXXL$011_SHR.EXE /OPEN /SHARED
           INSTALL> EXIT

           Add the following lines to the appropriate system startup
           command file so that HP C++ is available as a shared
           image each time the system is started. (If your site has
           modularized its startup procedures, be sure you add the
           lines to the correct file.) The default startup command
           file is SYS$MANAGER:SYSTARTUP_VMS.COM.

           $ INSTALL
           ADD SYS$SYSTEM:CXX$COMPILER.EXE /OPEN /SHARED
           ADD SYS$LIBRARY:CXXL$011_SHR.EXE /OPEN /SHARED
           EXIT

           Using the /PRIVILEGED qualifier is neither necessary nor
           recommended.

           To install the compiler message file, enter the following
           commands:

           $ INSTALL
           INSTALL> ADD SYS$MESSAGE:CXX$COMPILER_MSG.EXE
           INSTALL> EXIT

           To install the Class Library message file, enter the
           following commands:

           $ INSTALL
           INSTALL> ADD SYS$MESSAGE:CXXL$MSG_SHR.EXE
           INSTALL> EXIT

           When you install HP C++ as a shared image you need
           to increase the global pagelets and global sections
           parameters. See Section 1.5.6.2 for information on
           changing these parameters.

     3-4 After C++ Installation

 






        3.6 Removing the Compiler from Your System

              A command procedure CXX$PRODUCT_REMOVE is available should
              you wish to remove the HP C++ compiler product from
              your system for any reason. The procedure performs the
              equivalent of a PCSI PRODUCT REMOVE command.

              Before issuing the command procedure, you are required to
              disable the product license to prevent a compilation from
              interfering with the delete process.

              If the compiler has been installed as a shared image, the
              command procedure will uninstall the image.

              The command procedure takes no parameters and can be run
              as follows:

              $ @SYS$SYSTEM:CXX$PRODUCT_REMOVE

              Do you wish to proceed with removing HP C++ <No>? Yes [Ret]

              Enter "Yes" to remove the compiler from your system.

        3.7 Getting Help and Reporting Problems

              If an error occurs while HP C++ is in use and you believe
              the error is caused by a problem with the product, please
              report it to HP.

              If you have a Software Product Services Support Agreement,
              contact your Customer Support Center (CSC) by telephone
              or by using the electronic means provided with your
              support agreement (such as DSNlink). The CSC provides
              telephone support for high-level advisory and remedial
              assistance. When you initially contact the CSC, indicate
              the following:

              o  The name and version number of the operating system you
                 are using

              o  The version number of HP C++ you are using

              o  The hardware system you are using (such as a model
                 number)

              o  A brief description of the problem (one sentence if
                 possible)

              o  How critical the problem is

                                              After C++ Installation 3-5

 






           Whether you submit information electronically or contact
           the appropriate support specialist by telephone, please
           take the following steps:

           1. Describe as accurately as possible the circumstances
              and state of the system when the problem occurred.
              Include the description and version number of the HP
              C++ compiler being used. Demonstrate the problem with
              specific examples.

           2. Reduce the problem to as small a size as possible.

           3. Remember to include listings of any command files,
              INCLUDE files, or relevant data files, and so forth.

           4. Provide a listing of the program.

           5. If the program is longer than 50 lines, submit a copy
              of it on machine-readable media (diskette or magnetic
              tape).

           6. Report only one problem per report. This will
              facilitate a faster response.

           7. Mail the problem report to HP.

           If the problem is related to HP C++ documentation, you
           can report the problem to the CSC (if you have a Software
           Product Services Support Agreement and the problem is
           severe); otherwise, send your comments about HP C++
           documentation to the following Internet address:

           c_docs@hp.com

           To obtain information about purchasing a Software Product
           Services Support Agreement or other support services,
           please contact your local HP sales representative or
           business partner.







     3-6 After C++ Installation

 









                                                                       A
        ________________________________________________________________

                                        Sample C++ Compiler Installation



              This appendix contains a sample installation for the HP
              C++ kit. It is only a sample. Sometimes the installation
              procedure is modified in maintenance updates of this
              product.

              Because this installation guide is not usually revised
              for maintenance updates, be sure to read the applicable
              Read Before Installing or Using HP C++ letter before you
              install this product. This letter notes any significant
              changes to the installation sample shown here. Such
              information also appears in the online release notes.

              Depending on which layered products you have on your
              system, you might see additional messages and questions
              when you perform your installation.

              This sample installation assumes that DECnet has been shut
              down, that no users are logged in to your system, and that
              OPTIONS N is specified to print the release notes. The
              Installation Verification Procedure (IVP) runs at the end
              of the installation.

              Example A-1 shows a sample installation of HP C++ 7.1 on
              an OpenVMS Alpha Version 8.2 system.











                                    Sample C++ Compiler Installation A-1

 






           Example A-1 Sample HP C++ Installation on OpenVMS Alpha
                       Version 8.2

           $ @sys$update:vmsinstal

                   OpenVMS Alpha Software Product Installation Procedure V8.2

           It is 16-June-2005 at 13:35.

           Enter a question mark (?) at any time for help.

           * Are you satisfied with the backup of your system disk [YES]? Y

           * Where will the distribution volumes be mounted: DKA400:[CXX071]

           Enter the products to be processed from the first distribution volume set.
           * Products: cxx
           * Enter installation options you wish to use (none): n

           The following products will be processed:

             CXX V7.1

                   Beginning installation of CXX V7.1 at 13:35

           %VMSINSTAL-I-RESTORE, Restoring product save set A ...
           %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

               HP C++ Version V7.1 for OpenVMS Alpha Systems

               Copyright 2005 Hewlett-Packard Development Company, L.P.

               Confidential computer software. Valid license from HP required for
               possession, use or copying. Consistent with FAR 12.211 and 12.212,
               Commercial Computer Software, Computer Software Documentation, and
               Technical Data for Commercial Items are licensed to the U.S. Government
               under vendor's standard commercial license.

           * Should this V7.1-001 system compiler remain the default when cxx is typed [NO]:
               The newly installed compiler will become the system default compiler.

           * Do you want to purge files replaced by this installation [YES]?

                                             (continued on next page)

     A-2 Sample C++ Compiler Installation

 






              Example A-1 (Cont.) Sample HP C++ Installation on OpenVMS
                                  Alpha Version 8.2

                  This kit contains an Installation Verification Procedure
                  (IVP) to  verify  the  correct  installation of the
                  HP C++ compiler component and  class library headers.
                  IVP will be placed in:

                              SYS$TEST:CXX$IVP.COM

                  After the  installation  is complete, you can invoke the
                  command file at any time to reverify that HP C++ is
                  installed and working correctly.   If you wish to invoke
                  it automatically  at the completion of this installation
                  procedure, answer Yes to the following question.

              * Do you want to run the IVP after the installation [YES]? Y

                  The C Runtime Library, and C++ Class Library,  headers
                  will be installed as Text Libraries (.TLBs).   If you
                  also wish to install the traditional text form  of the
                  headers (.H and .HXX  files) for  reference  purposes,
                  please answer yes to the following question.  The text
                  headers will be placed in a subdirectory that will not
                  be searched  by the compiler.   Instead, they  will be
                  placed the subdirectory tree:

                          SYS$COMMON:[CXX$LIB.REFERENCE...]

                  ( SYS$COMMON:[CXX$LIB.REFERENCE...] for the HP C RTL
                  header library, CXX$RTLDEF, and the system definition
                  header library, SYS$STARLET_C.)

                  Note that doing this may double the disk space used for
                  the headers.

              * Do you want to install the text form of the headers?  [YES]? Y

                  The HP C++ compiler component requires a Product
                  Authorization Key (PAK) for HP C++ to be registered and
                  loaded.   Answer the following question with YES if a PAK
                  with the specified product name and a date equal to or
                  later than the date shown is registered and loaded, otherwise
                  answer NO.

                                                (continued on next page)

                                    Sample C++ Compiler Installation A-3

 






           Example A-1 (Cont.) Sample HP C++ Installation on OpenVMS
                               Alpha Version 8.2

                   Product:      CXX-V
                   Producer:     DEC

                   Version:      7.1
                   Release Date: dd-mmm-2005

           * Does this product have an authorization key registered and loaded? Y

               All questions and validations regarding the installation of HP C++
               kit components have now been asked.  Depending upon your configuration,
               time estimates for the installation(s) are as follows:

               Compiler/Linker/Library:   2  minutes
               Text form of headers:      4  minutes
               IVP:                       2  minutes
               Moving files:              6  minutes

               You may optionally add the SYS$STARTUP:CCXX$STARTUP.COM to the
               system startup procedure. To use HP C++ for OpenVMS Alpha on
               other Alpha nodes of a VMScluster, from a privileged account on each
               such node enter the command "$ @SYS$STARTUP:CCXX$STARTUP.COM".  This
               will install images.

               The existing version of VMI$ROOT:[SYSLIB]DECC$RTLDEF.TLB is
               identical or newer than the one on this installation kit.
               Installation of the kit version will not be performed.

               Your OpenVMS system will now be updated to include the following
               new and modified file(s):

               SYS$HELP:CXX.RELEASE_NOTES                        [new]
               SYS$HELP:CXX_RELEASE_NOTES.PS                     [new]
               SYS$TEST:CXX$IVP.COM                              [new]
               SYS$SYSTEM:CXX$DELETE_VERSION.COM                 [new]
               SYS$SYSTEM:CXX$SET_VERSION.COM                    [new]
               SYS$SYSTEM:CXX$SHOW_VERSIONS.COM                  [new]
               SYS$SYSTEM:CXX$COMPILER.EXE                       [new]
               SYS$MESSAGE:CXX$COMPILER_MSG.EXE                  [new]
               SYS$LIBRARY:DCLTABLES.EXE                         [modified]
               SYS$COMMON:[CXX$LIB]CXX$CLD.CLD                   [new]

                                             (continued on next page)

     A-4 Sample C++ Compiler Installation

 






              Example A-1 (Cont.) Sample HP C++ Installation on OpenVMS
                                  Alpha Version 8.2

                  SYS$SYSTEM:CXX$COMPILER_V07_01-001.EXE            [new]
                  SYS$MESSAGE:CXX$COMPILER_MSG_V07_01-001.EXE       [new]
                  SYS$COMMON:[CXX$LIB]CXX$CLD_V07_01-001.CLD        [new]

                  SYS$HELP:HELPLIB.HLB                              [modified]
                  SYS$SYSTEM:CXX$LINK.EXE                           [new]
                  SYS$MESSAGE:CXX$LINK_MSG.EXE                      [new]
                  SYS$COMMON:[CXX$LIB]CXXLINK.CLD                   [new]

                  SYS$SYSTEM:CXX$LINK_V07_01-001.EXE                [new]
                  SYS$MESSAGE:CXX$LINK_MSG_V07_01-001.EXE           [new]
                  SYS$COMMON:[CXX$LIB]CXXLINK_V07_01-001.CLD        [new]

                  SYS$SYSTEM:CXX$DEMANGLE.EXE                       [new]
                  SYS$COMMON:[CXX$LIB]CXXDEMANGLE.CLD               [new]

                  SYS$SYSTEM:CXX$DEMANGLE_V07_01-001.EXE            [new]
                  SYS$COMMON:[CXX$LIB]CXXDEMANGLE_V07_01-001.CLD    [new]

                  SYS$HELP:[CXX$HELP]INTZLN.PDF                     [new]
                  SYS$HELP:[CXX$HELP]IOSTREAM.PDF                   [new]
                  SYS$HELP:[CXX$HELP]INTZLN.PS                      [new]
                  SYS$HELP:[CXX$HELP]IOSTREAM.PS                    [new]
                  SYS$HELP:[CXX$HELP]CXX_CLASSLIB.PS                [new]
                  SYS$HELP:[CXX$HELP]CXX_USERSGUIDE.PS              [new]
                  SYS$HELP:[CXX$HELP]CXX_CLASSLIB.TXT               [new]
                  SYS$HELP:[CXX$HELP]CXX_USERSGUIDE.TXT             [new]
                  SYS$STARTUP:CCXX$STARTUP.COM                      [new]
                  SYS$LIBRARY:LIBCXXSTD.OLB                         [new]
                  SYS$LIBRARY:LIBCXXSTD_MA.OLB                      [new]
                  SYS$LIBRARY:LIBCXXSTD_NOINST.OLB                  [new]
                  SYS$LIBRARY:LIBCXXSTD_MA_NOINST.OLB               [new]

                  SYS$LIBRARY:LIBCXXSTD_V07_01-001.OLB              [new]
                  SYS$LIBRARY:LIBCXXSTD_MA_V07_01-001.OLB           [new]
                  SYS$LIBRARY:LIBCXXSTD_NOINST_V07_01-001.OLB       [new]
                  SYS$LIBRARY:LIBCXXSTD_MA_NOINST_V07_01-001.OLB    [new]

                  SYS$LIBRARY:CXXL$ANSI_DEF.TLB                     [new]

                  SYS$LIBRARY:CXXL$ANSI_DEF_V07_01-001.TLB          [new]

                                                (continued on next page)

                                    Sample C++ Compiler Installation A-5

 






           Example A-1 (Cont.) Sample HP C++ Installation on OpenVMS
                               Alpha Version 8.2

           %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

            Beginning HP C++ V7.1-001 Installation Verification Procedure

            Copyright 2005 Hewlett-Packard Development Company, L.P.

            Confidential computer software. Valid license from HP required for
            possession, use or copying. Consistent with FAR 12.211 and 12.212,
            Commercial Computer Software, Computer Software Documentation, and
            Technical Data for Commercial Items are licensed to the U.S. Government
            under vendor's standard commercial license.

            Test compiler operation and error messages...

            Test Class Library operation...

            HP C++ V7.1-001 Installation Verification Procedure completed successfully

                Installation of CXX V7.1 completed at 13:45

            Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY

            Creating installation data file: VMI$ROOT:[SYSUPD]CXX071.VMI_DATA

           Enter the products to be processed from the next distribution volume set.

           * Products:

                   VMSINSTAL procedure done at 13:45
           $












     A-6 Sample C++ Compiler Installation

 









                                                                       B
        ________________________________________________________________

                                          Files Installed on Your System



              The HP C++ installation procedure installs and modifies a
              number of files on your system, as listed in Table B-1.

              Table_B-1_Files_Installed_or_Modified_____________________

              File_____________________________________New_or_Modified__

              SYS$HELP:CXX.RELEASE_NOTES               new

              SYS$HELP:CXX_RELEASE_NOTES.PS            new

              SYS$TEST:CXX$IVP.COM                     new

              SYS$SYSTEM:CXX$DELETE_VERSION.COM        new

              SYS$SYSTEM:CXX$SET_VERSION.COM           new

              SYS$SYSTEM:CXX$SHOW_VERSIONS.COM         new

              SYS$SYSTEM:CXX$COMPILER.EXE              new

              SYS$MESSAGE:CXX$COMPILER_MSG.EXE         new

              SYS$LIBRARY:DCLTABLES.EXE                modified

              SYS$COMMON:[CXX$LIB]CXX$CLD.CLD          new

              SYS$SYSTEM:CXX$COMPILER_V07_01-001.EXE   new

              SYS$MESSAGE:CXX$COMPILER_MSG_V07_01-     new
              001.EXE

              SYS$COMMON:[CXX$LIB]CXX$CLD_V07_01-      new
              001.CLD

              SYS$HELP:HELPLIB.HLB                     modified

              SYS$SYSTEM:CXX$LINK.EXE                  new

              SYS$MESSAGE:CXX$LINK_MSG.EXE             new

              SYS$COMMON:[CXX$LIB]CXXLINK.CLD          new

                                                (continued on next page)

                                      Files Installed on Your System B-1

 






           Table_B-1_(Cont.)_Files_Installed_or_Modified_____________

           File_____________________________________New_or_Modified__

           SYS$SYSTEM:CXX$LINK_V07_01-001.EXE       new

           SYS$MESSAGE:CXX$LINK_MSG_V07_01-001.EXE  new

           SYS$COMMON:[CXX$LIB]CXXLINK_V07_01-      new
           001.CLD

           SYS$SYSTEM:CXX$DEMANGLE.EXE              new

           SYS$COMMON:[CXX$LIB]CXXDEMANGLE.CLD      new

           SYS$SYSTEM:CXX$DEMANGLE_V07_01-001.EXE   new

           SYS$COMMON:[CXX$LIB]CXXDEMANGLE_V07_     new
           01-001.CLD

           SYS$HELP:[CXX$HELP]INTZLN.PDF            new

           SYS$HELP:[CXX$HELP]IOSTREAM.PDF          new

           SYS$HELP:[CXX$HELP]INTZLN.PS             new

           SYS$HELP:[CXX$HELP]IOSTREAM.PS           new

           SYS$HELP:[CXX$HELP]CXX_CLASSLIB.PS       new

           SYS$HELP:[CXX$HELP]CXX_USERSGUIDE.PS     new

           SYS$HELP:[CXX$HELP]CXX_CLASSLIB.TXT      new

           SYS$HELP:[CXX$HELP]CXX_USERSGUIDE.TXT    new

           SYS$STARTUP:CCXX$STARTUP.COM             new

           SYS$LIBRARY:LIBCXXSTD.OLB                new

           SYS$LIBRARY:LIBCXXSTD_MA.OLB             new

           SYS$LIBRARY:LIBCXXSTD_NOINST.OLB         new

           SYS$LIBRARY:LIBCXXSTD_MA_NOINST.OLB      new

           SYS$LIBRARY:LIBCXXSTD_V07_01-001.OLB     new

           SYS$LIBRARY:LIBCXXSTD_MA_V07_01-001.OLB  new

           SYS$LIBRARY:LIBCXXSTD_NOINST_V07_01-     new
           001.OLB

           SYS$LIBRARY:LIBCXXSTD_MA_NOINST_V07_     new
           01-001.OLB

           SYS$LIBRARY:CXXL$ANSI_DEF.TLB            new

                                             (continued on next page)

     B-2 Files Installed on Your System

 






              Table_B-1_(Cont.)_Files_Installed_or_Modified_____________

              File_____________________________________New_or_Modified__

              SYS$LIBRARY:CXXL$ANSI_DEF_V07_01-        new
              001.TLB___________________________________________________







































                                      Files Installed on Your System B-3

 









                                                                       C
        ________________________________________________________________

                                                  Recovering from Errors



              This appendix provides information to help you with
              failures or errors that might occur during product
              installation or product use.

        C.1 Failures During HP C++ Installation

              If VMSINSTAL detects any problems during the installation,
              it notifies you and asks if you want to continue the
              installation. In some instances, you can enter yes to
              continue. To stop the installation process and correct
              the situation, enter no or press Return, then correct the
              problem and restart the installation.

              If errors occur during the installation itself or when
              the Installation Verification Procedure (IVP) is running,
              VMSINSTAL displays failure messages. If the installation
              fails, you see the following message:

              %VMSINSTAL-E-INSFAIL, The installation of
              HP C++ 7.1 has failed.

              If the IVP fails, you see these messages:

              The HP C++ 7.1 Installation Verification Procedure failed.

              %VMSINSTAL-E-IVPFAIL, The IVP for HP C++ 7.1 has failed.

              Errors can occur during the installation if any of the
              following conditions exist:

              o  The operating system version is incorrect.

              o  A prerequisite software version is incorrect.

              o  Quotas necessary for successful installation are
                 insufficient.

              o  System parameter values for successful installation are
                 insufficient.

                                              Recovering from Errors C-1

 






           o  The OpenVMS Help library is currently in use.

           o  The product license has not been registered and loaded.

           For descriptions of the error messages generated by these
           conditions, see the OpenVMS documentation on system
           messages, recovery procedures, and OpenVMS software
           installation. If you are notified that any of these
           conditions exist, you should take the appropriate
           action as described in the message. For information on
           installation requirements, see Chapter 1.

     C.2 Problems During HP C++ Use

           If you encounter a problem while using HP C++, see the
           Release Notes. If the problem is unresolved, report it
           to HP. Depending on the type of support you have and the
           nature of the problem, take one of the following actions:

           o  If you have a Software Product Services Support
              Agreement, contact your HP Customer Support Center
              (CSC), either by telephone or using the electronic
              means provided with your support agreement (such
              as DSNlink). The CSC provides telephone support for
              high-level advisory and remedial assistance. When
              you initially contact the CSC, please indicate the
              following:

              -  The name (OpenVMS Alpha) and version of your
                 operating system

              -  The product name (HP C++) and version number you are
                 using

              -  The hardware system you are using, such as a model
                 number

              -  A very brief description of the problem (one
                 sentence if possible)

              -  How critical the problem is

              When you submit information electronically or are
              speaking on the phone to the appropriate HP C++ support
              specialist, you can provide more detailed information.
              The information should include the specific commands
              used to compile and link the program, the error
              messages displayed, and relevant detailed information

     C-2 Recovering from Errors

 






                 (possibly including source program listings). Please
                 attempt to narrow the cause of the problem to a
                 specific module or lines of code.

                 CSC personnel might ask for additional information,
                 such as listings of any command files, INCLUDE and
                 COPY files, relevant data files, and so forth. If
                 the program is longer than 50 lines, submit a copy
                 of it electronically or provide machine-readable media
                 (floppy diskette or magnetic tape).

              o  If the problem is related to HP C++ documentation,
                 you can report the problem to the CSC (if you have a
                 Software Product Services Support Agreement and the
                 problem is severe); otherwise, send your comments about
                 HP C++ documentation to the following Internet address:

                 c_docs@hp.com



























                                              Recovering from Errors C-3
